Chapter 5
CLI Commands
dspgain
To display the adjustable gain for a specified VISM card, use the dspgain command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the adjustable gain values for the current VISM card are displayed:
dspgain
LineNo/Ds0No
------------
1/1
1/2
.
.
.
Related Commands
Command
cnfds0gain
cnfgain
cnflngain
dspds0gain
dsplngain
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspgain
InputGain
OutputAttenuation
---------
-----------------
0
100
10
60
Description
Configures the adjustable gain for a specified DS0.
Configures the adjustable gain for a VISM card.
Configures the adjustable gain for all DS0s on a specified VISM card line.
Displays the adjustable gain values for a specified DS0.
Displays the adjustable gain for a specified VISM card line.
Cisco VISM Installation and Configuration Guide
dspgain
5-349