Table of Contents
Advertisement
cnfannreqtimeout
cnfannreqtimeout
To configure the expiration time for announcements to begin playing after the VISM receives the
announcement signal (request) from the call agent, use the cnfannreqtimeout command in the VoIP
switching operating mode. Requests are aborted when the expiration time is reached and the
announcement has not started.
Syntax Description
ann-req-time
Command Modes
VoIP switching
Usage Guidelines
If the call agent signals the announcement to be played toward the packet network on a connection that
is not in a send mode, the request is deferred until the call agent modifies the connection. Once the
connection is placed in send mode, the expiration timer is started.
Examples
The following example shows that announcements must begin playing within 12 seconds after the VISM
receives the announcement signal from the call agent, after which time, requests are aborted:
cnfannreqtimeout 12
Related Commands
Command
addannpermanent
cnfannagetime
cnfanndn
cnfannpathprefix
cnfannprefcodec
delannalldynamic
delanndynamic
delannpermanent
dspannagetime
Cisco VISM Installation and Configuration Guide
5-84
cnfannreqtimeout ann-req-time
The expiration time for a dynamic play announcement request (defined in
seconds). It can be in the range from 0 to 15. (Default = 5)
Note
Description
Configures an announcement server file and associated codec type as
permanent.
Configures the time that a nonpermanent announcement is to remain valid after
it is placed into the VISM announcement cache.
Designates an announcement file server domain name.
Designates the main prefix directory TFTP path from which to retrieve
announcement files from the announcement file server.
Configures the codec type used for announcements played on unconnected
TDM endpoints.
Deletes all announcement files and their associated codec types from the
temporary announcement files currently saved in the VISM card.
Deletes an announcement file and associated codec type from the temporary
announcement files currently saved in the VISM card.
Deletes a permanent announcement file and its associated codec type from the
announcement file server.
Displays the time that a nonpermanent announcement is to remain valid after
it is placed into the VISM announcement cache.
If ann-req-time = 0, the expiration time is not set, no expiration occurs,
and requests are not aborted.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
