Table of Contents
Advertisement
cnfmgcgrpprotocol
resp-ack
disc-proc-enable
cancel-grace
Command Modes
VoIP switching/trunking, switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2
trunking, VoIP and switched ATM AAL1 SVC
Usage Guidelines
Use this command to change the protocol for a redundancy group that has previously been assigned a
protocol with the addmgcgrpprotocol command.
Examples
The following example shows that redundancy group number 7 is assigned the SRCP 1.0.2 protocol, and
quarantines persistent events with the loop, process handling method. All optional arguments are
enabled.
cnfmgcgrpprotocol 7 3 1 3 1 1 1 1 1
Related Commands
Command
addmgcgrpprotocol Associates a call agent redundancy group to a gateway control protocol.
cnfdisctimers
cnfxgcppeer
delmgcgrpprotocol
dspdisctimers
Cisco VISM Installation and Configuration Guide
5-184
(Optional) Enables or disables sending a response acknowledgment. It can be
one of the following values:
•
1 = On (Default for MGCP 1.0)
•
2 = Off (Default for MGCP 0.1, SGCP 1.1+, SRCP 1.0.2, and SGCP 1.5)
(Optional) Enables or disables the disconnect method, which indicates that the
endpoint has become disconnected and is now trying to establish connectivity.
It can be one of the following values:
•
1 = On (Default for MGCP 1.0)
•
2 = Off (Default for MGCP 0.1, SGCP 1.1+, SRCP 1.0.2, and SGCP 1.5)
(Optional) Enables or disables VISM cancelling a previously issued graceful
restart command. It can be one of the following values:
1 = On (Default for MGCP 1.0)
•
2 = Off (Default for MGCP 0.1, SGCP 1.1+, SRCP 1.0.2, and SGCP 1.5)
•
Description
Specifies the wait delay times for the disconnected procedure, restart in
progress command—initial, minimum, and maximum timer values.
Configures the UDP port number used to send gateway-initiated messages to
the call agent.
Deletes an MGCP from a specified call agent redundancy group.
Displays the Restart in Progress command disconnect type method wait delay
times.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
