dspmgprotocols
dspmgprotocols
To display data of all call agent—Media Gateway Control (MGC)—protocols available to VISM, use the
dspmgprotocols command in the VoIP switching/trunking and switched AAL2 PVC operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the call agent protocols available to VISM are displayed:
dspmgprotocols
Number
------
1
2
3
4
5
Related Commands
Command
delmgcgrpprotocol
Cisco VISM Installation and Configuration Guide
5-386
dspmgprotocols
mgProcotol
----------
MGCP 0.1
SGCP 1.1+
SRCP 1.0.2
SRCP 1.5
MGCP 1.0
Description
Deletes an MGCP from a specified call agent redundancy group.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands