Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 612

dspxgcpcon
MDCX Ack (MDCX Ack - CRCX)
Time since the CRCX was received
(CRCX Command is not shown since it is used as reference)
Codec List: Codec[1]
Pkt. Period List[1]: Pkt. Period[1]
Pkt. Period Range[1] - Low
Pkt. Period Range[1] - High
LCO Codec List[1]
LCO Pkt. Period Range
LCO Pkt. Period Range
TDM Endpoint Connected to DSP Channel
DSP Channel Connected to Network Endpoint
Related Commands Command
delxgcpcon
dspxgcpcids
dspxgcpcons
dspxgcpendpts
Cisco VISM Installation and Configuration Guide
5-468
= 80.000000000 ms
= 2016.930000000 sec
- Low
- High
Description
Deletes an xGCP connection specified by the xGCP connection identification
number.
Displays the LCN, CID, xGCP connection ID, endpoint name, and call ID
corresponding to each call agent established AAL2 connection on the gateway.
Displays the xGCP connection identification number, endpoint name, and call
identification number corresponding to each call agent established connection on
the gateway.
Displays the xGCP endpoint names of all endpoints added with the addendpt
command, or the SNMP equivalent.
= PCMA
= 10 ms
= 10 ms
= 10 ms
= PCMA
= 0 ms
= 0 ms
= TRUE
= TRUE
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands