Table of Contents
Advertisement
Chapter 5
CLI Commands
dspsesgrp
To display configuration data of a Primary Rate Interface (PRI) backhaul session group, use the
dspsesgrp command in the VoIP switching/trunking and switched AAL2 PVC operating modes.
Syntax Description
group-num
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the PRI backhaul configuration data for session group number 2 is
displayed:
dspsesgrp 2
vismSessionGrpNum:
vismSessionGrpSetNum:
vismSessionGrpState:
vismSessionGrpCurrSession:
vismSessionGrpTotalSessions:
vismSessionGrpMgcName:
vismSessionGrpSwitchFails:
vismSessionGrpSwitchSucesses: 0
Related Commands
Command
addsesgrp
delsesgrp
dspsesgrps
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspsesgrp group-num
Identifying session group number for which you want to display the PRI backhaul
configuration data. It can be in the range from 1 to 16.
Description
Adds a PRI backhaul session group between a VISM card and a call agent.
Deletes a PRI backhaul session group.
Displays data about all PRI backhaul session groups.
2
1
?
0
0
abc
0
Cisco VISM Installation and Configuration Guide
dspsesgrp
5-423
Advertisement
Table of Contents
