Table of Contents
Advertisement
dspvoipparams
dspvoipparams
To display the VoIP switching/trunking operating mode parameters, use the dspvoipparams command
in the VoIP switching/trunking operating mode.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking
Usage Guidelines
The following parameters are displayed when you use this command:
•
•
•
•
•
Examples
The following example shows that the VoIP switching/trunking operating mode parameters are
displayed:
dspvoipparams
VoIP DTMF RELAY:
VoIP CAS BITS TRANSPORT:
VoIP VAD TIMER:
VoIP EVENT NEGOTIATE POL: proprietary
VoIP SID PAYLOAD TYPE:
Related Commands
Command
cnfvoiptimerparam
cnfvoiptransparams
Cisco VISM Installation and Configuration Guide
5-458
dspvoipparams
DTMF relay status—Displays whether the CAS bits are configured to be relayed to the other
endpoint.
CAS bits transport status—Displays whether the DTMF tones are configured to be relayed to the
other endpoint.
VAD timer value—Displays the hangover time before silence compression is invoked.
Event negotiation policy—None, proprietary, or all.
Silence insertion descriptor (SID) payload type.
Off
Off
250
13
Description
Configures the holdover time for VAD before silence compression is
activated.
Configures the VoIP transportation parameters.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
