Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 434

dspanncache
dspanncache
To display all available temporary announcement file names, and associated age times before being
refreshed from the announcement file server, contained in the current VISM card, use the dspanncache
command in the VoIP switching operating mode.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the temporary announcement file names zero and one are each
configured with an age time of 1000 minutes:
dspanncache
File Name
zero
one
Related Commands Command
addannpermanent
cnfannagetime
cnfanndn
cnfannpathprefix
cnfannprefcodec
cnfannreqtimeout
delannalldynamic
delanndynamic
delannpermanent
dspannagetime
Cisco VISM Installation and Configuration Guide
5-290
dspanncache
Codec Time Till Aged
1 1000
2 1000
Description
Configures an announcement server file and associated codec type as
permanent.
Configures the time that a nonpermanent announcement is to remain valid after
it is placed into the VISM announcement cache.
Designates an announcement file server domain name.
Designates the main prefix directory TFTP path from which to retrieve
announcement files from the announcement file server.
Configures the codec type used for announcements played on unconnected
TDM endpoints.
Configures the expiration time for announcements to begin playing after the
VISM receives the announcement signal (request) from the call agent.
Deletes all announcement files and their associated codec types from the
temporary announcement files currently saved in the VISM card.
Deletes an announcement file and associated codec type from the temporary
announcement files currently saved in the VISM card.
Deletes a permanent announcement file and its associated codec type from the
announcement file server.
Displays the time that a nonpermanent announcement is to remain valid after
it is placed into the VISM announcement cache.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands