Chapter 5
CLI Commands
delcasvar
To delete a channel associated signaling (CAS) variant, use the delcasvar command in the VoIP
switching/trunking operating mode.
Syntax Description
var-name
Command Modes
VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the CAS variant identified by the name var1 is deleted:
delcasvar var1
Related Commands
Command
addcasvar
cnfcasvar
dspcasvar
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
delcasvar var-name
Name of the CAS variant you want to delete; a text string of 1 to 64 alphanumeric
characters.
Description
Adds a CAS variant to a VISM card.
Configures the CAS variant timing parameters.
Displays information about CAS variants for a given variant name.
Cisco VISM Installation and Configuration Guide
delcasvar
5-245