Table of Contents
Advertisement
cnfrtpcon
Examples
The following example shows that the RTP trunking connection 26 is configured (modified) with
G.726/32 codec type. VISM is also configured to send and receive packets and has a 20-ms packetization
period, a bearer precedence of 3, a bearer ToS of 1, with VAD enabled, and a 400-ms VAD holdover time.
Also, ECAN, CAS, DTMF tone transport, idle code suppression for CID, and redundancy are enabled:
cnfrtpcon 26 3 3 20 3 1 1 400 1 1 1 1 1
Related Commands
Command
addlapdtrunk
addrtpcon
addrudptrunk
clrrtpcnt
cnflapdtrunkpvc
cnflntrunkcond
cnfrudptrunkrmtip Modifies the remote IP address of VISM used in the ISDN PRI backhaul RUDP
dellapdtrunk
delrtpcon
delrudptrunk
dsplapd
dsplapdtrunkpvc
dsplapdtrunks
dsprtpcnt
dsprtpcon
dsprtpconnstat
dsprtpcons
dsprudptrunk
dsprudptrunks
Cisco VISM Installation and Configuration Guide
5-200
Description
Adds an LAPD trunk to a specific VISM card line.
Adds a static RTP VoIP trunking connection.
Adds an ISDN PRI backhaul RUDP session for an LAPD trunk connection.
Clears the RTP counters (statistics) for a specific static RTP connection.
Assigns the PVC trunk type that carries LAPD messages for the current VISM
card.
Enables or disables line conditioning on a VISM card line if a network alarm
is encountered.
trunk for a specified session.
Deletes an LAPD configured line.
Deletes a static RTP VoIP trunking connection.
Deletes an ISDN PRI backhaul RUDP session that is associated with an LAPD.
Displays data about an LAPD.
Displays the assigned PVC trunk type that carries LAPD trunk messages for
the current VISM card.
Displays the configuration data of all LAPD trunks.
Displays the bearer counters (statistics) for a specific RTP VoIP trunking
connection.
Displays the configuration data of a specific static RTP VoIP trunking
connection.
Displays the RTP connection statistics for a specified endpoint.
Displays the configuration data of all static RTP VoIP trunking connections.
Displays the configuration data of a specified ISDN PRI backhaul RUDP
session.
Displays the configuration data of all ISDN PRI backhaul RUDP sessions.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
