Table of Contents
Advertisement
Chapter 5
CLI Commands
addconloop
To set a cellbus connection to local loopback state on a current card, use the addconloop command in
the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
lcn
Command Modes
VoIP switching/trunking, switched AAL2 PVC, AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example places the channel number 132 in loopback state:
addconloop 132
Related Commands
Command
delconloop
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
addconloop lcn
Logical channel number of the CCS channel to be added in the range from 131 to 510.
Description
Deletes a local loopback state on a VISM line.
Cisco VISM Installation and Configuration Guide
addconloop
5-15
Advertisement
Table of Contents
