Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 538

dspprofparams
dspprofparams
To display the profile elements and the preference for all profiles, use the dspprofparams command in
the switched AAL2 PVC and AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes Switched AAL2 PVC and AAL2 trunking
Usage Guidelines
When you execute this command, the display includes the default voice and voiceband data profile
element which correspond to each supported profile.
Examples
The following example shows that the profile elements and preferences for all profiles are displayed:
dspprofparams
- - - - - - - - - - - - - - - - - - - - - -
Profile Type
Profile Number
Profile Preference
Voice Profile Codec
Voice Profile Packetization-period(ms): five
Voice Profile SID
VBD Profile Codec
VBD Profile Packetization-period (ms) : five
- - - - - - - - - - - - - - - - - - - - - -
Profile Type
Profile Number
Profile Preference
Voice Profile Codec
Voice Profile Packetization-period(ms): five
Voice Profile SID
VBD Profile Codec
VBD Profile Packetization-period (ms) : five
- - - - - - - - - - - - - - - - - - - - -
Profile Type
Profile Number
Profile Preference
Voice Profile Codec
Voice Profile Packetization-period(ms): five
Voice Profile SID
VBD Profile Codec
VBD Profile Packetization-period (ms) : five
- - - - - - - - - - - - - - - - - - - - - -
Profile Type
Profile Number
Profile Preference
Voice Profile Codec
Voice Profile Packetization-period(ms): ten
Voice Profile SID
VBD Profile Codec
VBD Profile Packetization-period (ms) : five
Cisco VISM Installation and Configuration Guide
5-394
dspprofparams
: ITU
: 1
: 4
: G.711u
: VAD on
: G.711u
: ITU
: 2
: 3
: G.711u
: sidGenric
: G.711u
: ITU
: 3
: 1
: G.726-32K
: sidGenric
: G.711u
: ITU
: 7
: 2
: G.729ab
: sid729
: G.711u
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands