Table of Contents
Advertisement
addln
addln
To add a T1 or E1 line to a VISM card, use the addln command in the VoIP switching/trunking, switched
AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
line-num
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that line number 1 is added to a VISM card:
addln 1
Related Commands
Command
cnfln
delln
dspln
Cisco VISM Installation and Configuration Guide
5-28
addln line-num
Line number of the T1 or E1 line to be added in the range from 1 to 8.
Description
Configures line characteristics for a specified line.
Deletes a DS1 line on a VISM card.
Displays the characteristics of a specified line.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
