Table of Contents
Advertisement
Chapter 5
CLI Commands
delcid
To delete the association between an endpoint and an LCN/CID pair, use the delcid command in the
AAL2 trunking operating mode.
Syntax Description
lcn
cid-num
Command Modes
AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the endpoint association for LCN 140 and CID 12 is deleted:
delcid 140 12
Related Commands
Command
addcid
dspcid
dsplncids
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
delcid lcn cid-num
The logical channel number of the LCN/CID pair in the range from 131 to 510.
The channel identification number of the LCN/CID pair in the range from 8 to 255.
Description
Adds an AAL2 CID on a VISM card.
Displays the data of an AAL2 CID on a VISM card.
Displays the CID, endpoint, and AAL2 data for a specified line.
Cisco VISM Installation and Configuration Guide
delcid
5-247
Advertisement
Table of Contents
