Table of Contents
Advertisement
cnfcac
cnfcac
To enable or disable the connection admission control (CAC) feature on a VISM card, use the cnfcac
command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
cac-enable
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
If you enable CAC with this command, you can then use the cnfconcac command to enable CAC on
PVCs.
Examples
The following example shows that CAC is disabled for the current card:
cnfcac 1
Related Commands
Command
cnfconcac
Cisco VISM Installation and Configuration Guide
5-86
cnfcac cac-enable
Enables or disables CAC. It can be one of the following values:
1 = On
•
2 = Off
•
Description
Enables CAC on an already added connection.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
