Table of Contents
Advertisement
Chapter 5
CLI Commands
codec-type
vt-pkt-period
bearer-prec
bearer-tos
conn-mode
ecan-enable
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
The type of coding/decoding to be performed on the data stream. It can be one
of the following values:
•
1 = G.711u
•
2 = G.711a
•
3 = G.726-32k
4 = G.729a
•
5 = G.729ab
•
6 = Clear channel (VAD must be off)
•
7 = G.726-16k
•
•
8 = G.726-24k
•
9 = G.726-40k
•
11 = G.723.1-H
•
12 = G.723.1a-H
•
13 = G.723.1-L
14 = G.723.1a-L
•
(Optional) Packetization period (defined in milliseconds). It can be one of the
following values:
10
•
•
20
•
30
•
40
•
60
(Optional) Bearer precedence. It can be in the range from 0 to 7. (Default = 5)
(Optional) Bearer type of service (ToS). It can be one of the following values:
0 (Default)
•
1
•
•
2
•
4
•
8
(Optional) Connection mode. It can be one of the following values:
1 = VISM sends packets
•
2 = VISM receives packets
•
3 = VISM sends and receives packets (Default)
•
•
4 = Inactive; VISM does not send or receive packets
(Optional) Enables or disables echo cancellation (ECAN). It can be one of the
following values:
•
1 = On (Default)
•
2 = Off
Cisco VISM Installation and Configuration Guide
addrtpcon
5-37
Advertisement
Table of Contents
