Table of Contents
Advertisement
Chapter 5
CLI Commands
cnfcaspackage
To configure the Media Gateway Control Protocol (MGCP) packages to notify persistent observed
channel associated signaling (CAS) events in the context of incoming and outgoing CAS calls on a
specified endpoint, use the cnfcaspackage command in the VoIP switching/trunking, switched AAL2
PVC, and AAL2 trunking operating modes.
Syntax Description
endpt-num
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
cnfcaspackage endpt-num in-package out-package
The endpoint number which is to be configured with the source location. It can
be a value from one of the following ranges:
•
For template number 1:
–
–
–
For template number 2:
•
–
–
•
For template number 3:
–
–
–
For template number 4:
•
–
For VISM, from 1 to 145
For VISM-PR T1, from 1 to 192
For VISM-PR E1, from 1 to 248
For VISM T1, from 1 to 192
For VISM E1, from 1 to 248
For VISM, from 1 to 120
For VISM-PR T1, from 1 to 192
For VISM-PR E1, from 1 to 248
For VISM-PR, from 1 to 144
Cisco VISM Installation and Configuration Guide
cnfcaspackage
5-105
Advertisement
Table of Contents
