Table of Contents
Advertisement
Chapter 5
CLI Commands
dspxgcpendpts
To display the xGCP endpoint names corresponding to each endpoint which has been added using the
addendpt command, or the SNMP equivalent, use the dspxgcpendpts command in the VoIP
switching/trunking and switched AAL2 PVC operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
The xGCP endpoint name is displayed with this command regardless of whether there are call agent
established connections associated with the endpoint. If there are call agent established connections
associated with the endpoint, the corresponding xGCP connection identification number and call
identification number appear on the same line as the endpoint name.
Examples
The following example shows that the endpoint names that correspond to each endpoint are displayed:
dspxgcpendpts
xGCP Endpoint Name
------------------
vism/T1-1/1
vism/T1-1/2
vism/T1-1/3
vism/T1-1/4
vism/T1-1/5
vism/T1-1/6
vism/T1-1/7
vism/T1-1/8
vism/T1-1/9
vism/T1-1/10
vism/T1-1/11
vism/T1-1/12
vism/T1-1/13
vism/T1-1/14
vism/T1-1/15
vism/T1-1/16
vism/T1-1/17
vism/T1-1/18
vism/T1-1/19
vism/T1-1/20
vism/T1-1/21
vism/T1-1/22
vism/T1-1/23
vism/T1-1/24
Related Commands
Command
dspxgcpendpt
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspxgcpendpts
xGCP Connection ID
------------------
4c5b
4c5c
Description
Displays the xGCP endpoint names corresponding to each endpoint number.
xGCP Call ID
--------------
C0011
C0012
Cisco VISM Installation and Configuration Guide
dspxgcpendpts
5-477
Advertisement
Table of Contents
