Chapter 5
CLI Commands
dspcasendpts
To display data about configured channel associated signaling (CAS) endpoints, use the dspcasendpts
command in the VoIP switching/trunking operating mode.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the CAS endpoint configuration data is displayed:
dspcasendpts
Endptds0Num CasVarName CasOnTime CasOffTime
-----
2
5
10
Related Commands
Command
dspcasvarendpts
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspcasendpts
------ ---------- --------- ---------
2
immd
5
wink
10
wink
Description
Displays all endpoints associated with a specified CAS variant name.
75
75
75
75
75
75
Cisco VISM Installation and Configuration Guide
dspcasendpts
5-307