Table of Contents
Advertisement
Chapter 5
CLI Commands
delxgcpcon
To delete an xGCP connection specified by the xGCP connection identification number, use the
delxgcpcon command in the VoIP switching/trunking and switched AAL2 PVC operating mode.
Syntax Description
conn-id
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the connection represented by the hexadecimal connection
identification B is configured for gateway-initiated DLCX commands:
delxgcpcon b
Related Commands
Command
dspxgcpcon
dspxgcpcons
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
delxgcpcon conn-id
Connection identification number. It can be in the range of hexadecimal numbers
from 0 to f.
Description
Displays the attributes associated with a call agent established connection.
Displays the xGCP connection ID, endpoint name, and call ID corresponding to each
call agent established connection on the gateway.
Cisco VISM Installation and Configuration Guide
delxgcpcon
5-277
Advertisement
Table of Contents
