Table of Contents
Advertisement
Chapter 5
CLI Commands
dspccscnt
To display the common channel signaling (CCS) counter values for a specified line and DS0, use the
dspccscnt command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
operating modes.
Syntax Description
line-num
ds0-num
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the CCS counter values for line number 1, DS0 10 are displayed:
dspccscnt 1 10
ds0IfIndex:
TxFrameCount:
RxFrameCount:
RxCRCErrorCount:
RxBufOverflowCount: 0
TxUnderflowCount:
TxAbortCount:
RxAbortCount:
Related Commands
There are no related commands.
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspccscnt line-num ds0-num
Line number for which you want to display the CCS counter values. It can be in the
range from 1 to 8.
DS0 number of which you want to display the CCS counter values. It can be a value
from one of the following ranges:
•
1 to 24 for T1 lines
1 to 31 for E1 lines
•
10
0
0
0
0
0
0
Cisco VISM Installation and Configuration Guide
dspccscnt
5-321
Advertisement
Table of Contents
