Table of Contents
Advertisement
delsesset
delsesset
To delete a PRI backhaul session set, use the delsesset command in the VoIP switching/trunking and
switched AAL2 PVC operating mode.
Syntax Description
set-num
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
You must delete all session groups in the session set before you use this command to delete the session
set.
Examples
The following example shows that session set number 1 is deleted:
delsesset 1
Related Commands
Command
addsesset
Cisco VISM Installation and Configuration Guide
5-274
delsesset set-num
Identifying session set number. It can be in the range from 1 to 16.
Currently, only session set number 1 is supported.
Note
Description
Adds a PRI backhaul session set between a VISM card and a call agent.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
