JunosE 11.3.x Broadband Access Configuration Guide
Meaning
Related
Documentation
454
host1:dialout#show l2tp dial-out virtual-router allVirtualRouters
NOTE: The level of a user's permission determines the use of the
allVirtualRouters option. For example, if you have permission to view only
the current virtual router, then that is all that is displayed when you enter a
command.
Table 97 on page 454 lists the show l2tp dial-out virtual-router command output fields.
Table 97: show l2tp dial-out virtual-router Output Fields
Field Name
Virtual router
Virtual router operational status
Maximum trigger buffers per
session
For detailed information about operational states, see Dial-Out Operational States on
page 411
show l2tp dial-out virtual-router
Field Description
Name of VR
Operational status of the VR
Maximum number of trigger packets held in buffer
while the dial-out session is being established
Copyright © 2010, Juniper Networks, Inc.