Files - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

files

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
files number;
[edit system syslog archive],
[edit system syslog file filename archive]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure the maximum number of archived log files to retain. When the Junos OS logging
utility has written a defined maximum amount of data to a log file
file, compresses it, and renames it to
file size, see size). The utility then opens and writes to a new file called
new file reaches the maximum size, the
new file is closed, compressed, and renamed
creates up to ten archive files in this manner. Once the maximum number of archive files
exists, each time the active log file reaches the maximum size, the contents of the oldest
archive file are lost (overwritten by the next oldest file).
—Maximum number of archived files.
number
Range: 1 through 1000
Default: 10 files
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Specifying Log File Size, Number, and Archiving Properties
Junos System Log Messages Reference
size on page 665
Chapter 35: Configuration Statements for System Monitoring
(for information about the maximum
logfile.0.gz
file is renamed to
logfile.0.gz
. By default, the logging facility
logfile.0.gz
, it closes the
logfile
logfile . When the
, and the
logfile.1.gz
661