Show Virtual-Chassis Status - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos
Results
Verification
Purpose
Action
968
®
OS for EX Series Ethernet Switches, Release 10.3
NOTE: We recommend that you use the
to save any configuration changes that you make to a multimember
Virtual Chassis.
Display the results of the configuration on SWA-0:
[edit]
user@SWA-0# show virtual-chassis
member 0 {
mastership-priority 255;
}
member 1 {
mastership-priority 128;
}
member 2 {
mastership-priority 255;
}
member 3 {
mastership-priority 128;
}
}
To confirm that the configuration is working properly, perform these tasks:
Verifying the Member IDs and Roles of the Member Switches on page 968
Verifying that the Dedicated VCPs and Uplink VCPs Are Operational on page 969
Verifying the Member IDs and Roles of the Member Switches
Verify that all the interconnected member switches are included within the Virtual Chassis
configuration and that their roles are assigned appropriately.
Display the members of the Virtual Chassis configuration:
user@SWA-0> show virtual-chassis status
Virtual Chassis ID: 0000.e255.00e0
Member ID Status Serial No
0 (FPC 0) Prsnt abc123
1 (FPC 1) Prsnt def456
2 (FPC 2) Prsnt ghi789
commit synchronize
Mastership
Model Priority Role
ex4200-48p 255 Master*
ex4200-24t 128 Linecard
ex4200-48p 255 Backup
Copyright © 2010, Juniper Networks, Inc.
command
Neighbor List
ID Interface
1 vcp-0
2 vcp-1
2 vcp-255/1/0
0 vcp-0
0 vcp-1
3 vcp–255/1/0
3 vcp-0