Monitoring Configuration, Statistics, And Status For Vpls Network Interfaces - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

For e series broadband services routers - bgp and mpls configuration
Table of Contents

Advertisement

JunosE 11.2.x BGP and MPLS Configuration Guide
Related Topics

Monitoring Configuration, Statistics, and Status for VPLS Network Interfaces

Purpose
Action
616
Table 119: show bridge groups details Output Fields (continued)
Field Name
Max Learn
Link Status Snmp Traps
Subscriber Policy
Port Count
Interface Count
Transport Virtual Rtr
Route Distinguisher
SiteName
SiteId
Multi-homed
Site-Priority
SiteRange
VPLS Route Targets
Flood Next Hop
show bridge groups
Display configuration, statistics, and status information for a specified network interface
or for all interfaces assigned to a VPLS instance.
To display information for a specified network interface:
Field Description
Maximum number of dynamic MAC addresses that the VPLS
instance can learn
Whether SNMP link status processing is enabled or disabled
Name of the subscriber policy currently in effect
Number of ports currently configured for the VPLS instance,
including network interfaces and the VPLS virtual core interface
Number of network interfaces currently configured for the VPLS
instance
Name of the transport virtual router configured for the VPLS instance
Unique route distinguisher configured for the VPLS instance
Site name configured for the VPLS instance
Numerical site identifier configured for the VPLS instance
Status of the site. Yes designates a multihomed site. No designates
a site that is not multihomed.
Priority value for the VPLS instance for the multihomed site;
displayed only when the value for the Multi-homed field is Yes
Maximum number of sites that can participate in the VPLS domain
associated with the VPLS instance
Extended community identifiers, also known as route targets, for
each VPLS instance configured on the router
Index of the MPLS next hop to which the router floods packets with
unknown destination addresses. For more information about
displaying MPLS next hops and any available next-hop statistics,
see "Monitoring MPLS Next Hops" on page 355.
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2.x

Table of Contents