Table of Contents
Advertisement
Junos 10.3 System Log Messages Reference
Configuring Message Forwarding in the Routing Matrix
28
By default, the master Routing Engine on each T640 routing node forwards to the master
Routing Engine on the TX Matrix platform all messages from all facilities with severity
info
and higher. To change the facility, the severity level, or both, include the
r statement at the
scc-maste
[edit system syslog]
host scc-master {
facility severity;
}
To disable message forwarding, set the facility to
[edit system syslog]
host scc-master {
any none;
}
In either case, the setting applies to all T640 routing nodes in the routing matrix.
To capture the messages forwarded by the T640 routing nodes (as well as messages
generated on the TX Matrix platform itself), you must also configure system logging on
the TX Matrix platform. Direct the messages to one or more destinations by including
the appropriate statements at the [
platform:
To a file, as described in Directing Messages to a Log File.
To the terminal session of one or more specific users (or all users), as described in
"Directing Messages to a User Terminal" on page 12.
To the console, as described in "Directing Messages to the Console" on page 12.
To a remote machine that is running the
For more information, see "Directing Messages to a Remote Destination from the
Routing Matrix" on page 32.
As previously noted, the configuration statements included on the TX Matrix platform
also configure the same destinations on each T640 routing node.
When specifying the severity level for local messages (at the [
host | console | user)
] hierarchy level) and forwarded messages (at the [
] hierarchy level), you can set the same severity level for both, set
syslog host scc-master
a lower severity level for local messages, or set a higher severity level for local messages.
The following examples describe the consequence of each configuration. (For simplicity,
the examples use the
any
for different facilities, with more complex consequences.)
Messages Logged When Local and Forwarded Severity Level Are the Same on page 29
Messages Logged When Local Severity Level Is Lower on page 29
Messages Logged When Local Severity Level Is Higher on page 30
] hierarchy level on the TX Matrix platform:
[edit system syslog
any
edit system syslog
syslogd
utility or to the other Routing Engine.
facility in every case. You can also specify different severities
host
and the severity level to
none
] hierarchy level on the TX Matrix
edit system syslog (file |
edit system
Copyright © 2010, Juniper Networks, Inc.
:
Hide quick links:
Advertisement
Table of Contents
