Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 528

Junos 10.3 System Log Messages Reference
Type
Severity
Facility
PFE_SCCP_ADD_PORT_FAIL
System Log Message
Description
Type
Severity
Facility
PFE_SCCP_DEL_PORT_FAIL
System Log Message
Description
Type
Severity
Facility
PFE_SCCP_REG_NAT_VEC_FAIL
System Log Message
Description
Type
Severity
Facility
PFE_SCCP_REG_RM_FAIL
System Log Message
Description
Type
Severity
Facility
464
(ARP) entry and receiving a multicast data packet with no matching route. Normally, the
Packet Forwarding Engine forwards the requests to the Routing Engine.
Event: This message reports an event, not an error
info
LOG_PFE
Failed to add SCCP ALG port to application definition table
Failed to add the SCCP port to the application definition table.
Error: An error occurred
error
LOG_PFE
Failed to remove SCCP ALG port from application definition table
Failed to delete the SCCP port from application definition table.
Error: An error occurred
error
LOG_PFE
Failed to add SCCP ALG vector to flow module
Failed to register the SCCP vector with the flow module.
Error: An error occurred
error
LOG_PFE
Failed to register SCCP client to Resource Manager
Failed to register the SCCP Resource Manager client.
Error: An error occurred
error
LOG_PFE
Copyright © 2010, Juniper Networks, Inc.