Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 590

Junos 10.3 System Log Messages Reference
Type
Severity
Facility
RPD_LMP_NO_CALLBACK
System Log Message
Description
Type
Severity
Facility
RPD_LMP_NO_MEMORY
System Log Message
Description
Type
Severity
Facility
Cause
RPD_LMP_NO_PEER
System Log Message
Description
Type
Severity
Facility
RPD_LMP_PEER
System Log Message
Description
Type
Severity
Facility
526
Error: An error occurred
error
LOG_DAEMON
No function callback for label removed event
The routing protocol process (rpd) could not notify a client that a label was removed,
because there was no function callback for the removal event.
Error: An error occurred
error
LOG_DAEMON
function-name: malloc() failed (error-message, errno error-code)
The routing protocol process (rpd) could not allocate memory.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Peer peer-id not found for TE link link-name (index link-id)
The routing protocol process (rpd) could not locate the indicated peer while processing
a TE LINK message for the traffic-engineering link with the indicated name and index.
Error: An error occurred
error
LOG_DAEMON
operation operation failed: peer peer-name (index peer-id) reason
The routing protocol process (rpd) could not perform the indicated operation for the
peer with the indicated name and index, for the indicated reason.
Error: An error occurred
error
LOG_DAEMON
Copyright © 2010, Juniper Networks, Inc.