Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 190

Junos 10.3 System Log Messages Reference
Description
Type
Severity
Facility
Action
BOOTPD_MODEL_ERR
System Log Message
Description
Type
Severity
Facility
Action
BOOTPD_NEW_CONF
System Log Message
Description
Type
Severity
Facility
BOOTPD_NO_BOOTSTRING
System Log Message
Description
Type
Severity
Facility
126
As each hardware component on the routing platform initializes, it requests a boot string
from the boot parameter process (tnp.bootpd). A request failed because it included the
indicated assembly ID, which is inconsistent with the routing platform's model number.
Error: An error occurred
warning
ANY
Contact your technical support representative.
Unsupported model model, assuming M40 defaults
As each hardware component on the routing platform initializes, it requests a boot string
from the boot parameter process (tnp.bootpd). The boot strings are defined in the
configuration file for tnp.bootpd. A request included a model number for which there
was no definition in the configuration file, so tnp.bootpd provided the boot string
appropriate for an M40 router.
Error: An error occurred
warning
ANY
Contact your technical support representative.
New configuration installed
The boot parameter process (tnp.bootpd) loaded a new configuration file.
Event: This message reports an event, not an error
info
ANY
No boot string found for type board-type major-version.minor-version command-type
As each hardware component on the routing platform initializes, it requests a boot string
from the boot parameter process (tnp.bootpd). The boot strings are defined in the
configuration file for tnp.bootpd. The file did not include a boot string for the hardware
component with the indicated characteristics.
Error: An error occurred
warning
ANY
Copyright © 2010, Juniper Networks, Inc.