Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 206

Junos 10.3 System Log Messages Reference
CHASSISD_FASIC_CONFIG_COMPLETE
System Log Message
Description
Type
Severity
Facility
CHASSISD_FASIC_FTOKEN_ERROR
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_FASIC_FTOKEN_INIT_ERROR
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_FASIC_HSL_CONFIG_ERROR
System Log Message
Description
Type
Severity
Facility
142
Fchip: configuration already completed
The chassis process (chassisd) detected an attempt to configure an F chip on a Control
Board (CB) when configuration was already complete.
Error: An error occurred
error
LOG_DAEMON
Fchip (CB control-board-slot, ID fchip-id): ftoken overflow/underflow set (data) at address
The chassis process (chassisd) detected an underflow or overflow error on the indicated
F chip on the indicated Control Board (CB).
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Fchip (CB control-board-slot, ID fchip-id): f8chip_ftoken_init() stuck in ftoken loop,
addr=address, data=data
The chassis process (chassisd) encountered an error while initializing memory at the
indicated address for the indicated F chip on the indicated Control Board (CB).
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Fchip (CB control-board-slot, ID fchip-id): HSL configuration failed (error error-message)
The chassis process (chassisd) could not configure high speed links (HSL) for the
indicated F chip on the indicated Control Board (CB).
Error: An error occurred
error
LOG_DAEMON
Copyright © 2010, Juniper Networks, Inc.