Chapter 69 Pppd System Log Messages - Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual

CHAPTER 69
PPPD System Log Messages
PPPD_AUTH_CREATE_FAILED
System Log Message
Description
Type
Severity
Facility
PPPD_CHAP_AUTH_IN_PROGRESS
System Log Message
Description
Type
Severity
Facility
PPPD_CHAP_GETHOSTNAME_FAILED
System Log Message
Description
Type
Severity
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
Point-to-Point Protocol (PPP) process (pppd), which processes packets that use PPP.
Unable to allocate authentication handle: error-message
The Point-to-Point Protocol process (pppd) could not allocate an authentication object,
for the indicated reason.
Error: An error occurred
error
LOG_AUTH
Interface interface-name received response 'operation' with CHAP ID message-id, but
was still authenticating previous response
The Point-to-Point Protocol process (pppd) received another Challenge Handshake
Authentication Protocol (CHAP) response from a peer while authenticating a previous
CHAP response sent by that peer. The peer is resending CHAP responses faster than the
pppd process can process them.
Error: An error occurred
error
LOG_AUTH
interface-name: Unable to obtain hostname for outgoing CHAP message: error-message
The Point-to-Point Protocol process (pppd) could not obtain the hostname needed to
fill in the 'Name' field in an outgoing CHAP packet.
Error: An error occurred
error
prefix. They are generated by the
PPPD
479