Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 383

Type
Severity
Facility
JSRPD_REDUNDANCY_MODE_MISMATCH
System Log Message
Description
Type
Severity
Facility
JSRPD_RG_STATE_CHANGE
System Log Message
Description
Type
Severity
Facility
JSRPD_SET_CS_MON_FAILURE
System Log Message
Description
Type
Severity
Facility
JSRPD_SET_INTF_MON_FAILURE
System Log Message
Description
Type
Copyright © 2010, Juniper Networks, Inc.
Error: An error occurred
warning
LOG_DAEMON
Change in HA redundancy mode detected..please reboot all nodes in the cluster
simultaneously!!
The Juniper Services Redundancy Protocol process (JSRPD) detected a change in the
chassis cluster redundancy mode configuration and detected that only some (not all)
of the nodes rebooted. The new mode is not effective until all nodes in the cluster are
rebooted.
Error: An error occurred
warning
LOG_DAEMON
Redundancy-group rg-id transitioned from 'old-state' to 'new-state' state due to reason
The Juniper Services Redundancy Protocol process (JSRPD) detected an event that
caused the state of the chassis cluster redundancy group to change due to the reason
indicated in the log.
Event: This message reports an event, not an error
alert
LOG_DAEMON
Cold-sync Monitor failed for redundancy-group rg-id
The Juniper Services Redundancy Protocol process (JSRPD) detected cold-sync
monitoring failure for a redundancy group.
Error: An error occurred
error
LOG_DAEMON
Interface Monitor failed for redundancy-group rg-id
The Juniper Services Redundancy Protocol process (JSRPD) detected interface monitoring
failure for a redundancy group.
Error: An error occurred
Chapter 42: JSRPD System Log Messages
319