CHAPTER 80
SMTPD System Log Messages
SMTPD_DROP_MAIL_PAYLOAD
System Log Message
Description
Type
Severity
Facility
SMTPD_NO_CONFIGURED_SERVER
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
client process (smtpd).
Dropped mail to user:error-message. Send failed or queued reached max
The smtp client process (smtpd) attempted to send the mail payload to the configured
gateway mail server failed due to one of the following reasons: network connection
failure, error in the payload, or sent failed after retries. The mail is dropped.
Event: This message reports an event, not an error
error
LOG_DAEMON
Unable to send mail to error-message. Configure server with relay
The smtp client process (smtpd) is unable to send mail payload. A gateway server must
be configured. This server must allow relaying.
Event: This message reports an event, not an error
error
LOG_DAEMON
prefix. They are generated by smtp
SMTPD
593