Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 671

SNMPD_SYSOID_FAILURE
System Log Message
Description
Type
Severity
Facility
Cause
Action
SNMPD_SYSOID_GEN_FAILURE
System Log Message
Description
Type
Severity
Facility
Cause
Action
SNMPD_THROTTLE_QUEUE_DRAINED
System Log Message
Description
Type
Severity
Facility
SNMPD_TRAP_COLD_START
System Log Message
Description
Type
Copyright © 2010, Juniper Networks, Inc.
Unable to determine sysObjectID from internal model: model
The Simple Network Management Protocol (SNMP) agent process (snmpd) could not
determine the value of the sysObjectID object.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
Unable to generate OID for product product-name (error-message)
The Simple Network Management Protocol (SNMP) agent process (snmpd) could not
generate a value for the sysObjectID object for the indicated product.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
function-name: cleared all throttled traps
The queue of throttled traps was cleared.
Event: This message reports an event, not an error
info
LOG_DAEMON
function-name: SNMP trap: cold start
The Simple Network Management Protocol (SNMP) agent process (snmpd) generated
a cold-start trap when the entire Routing Engine (including the snmpd process) initialized.
Event: This message reports an event, not an error
Chapter 82: SNMPD System Log Messages
607