Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 204

Junos 10.3 System Log Messages Reference
CHASSISD_CONFIG_CHANGE_IFDEV_DEL
System Log Message
Description
Type
Severity
Facility
CHASSISD_CONFIG_INIT_ERROR
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_CONFIG_WARNING
System Log Message
Description
Type
Severity
Facility
CHASSISD_DEVICE_OPEN_ERROR
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_EXEC_ERROR
System Log Message
140
Deleting argument1 interface-typesdev-numberargument2 due to configuration change
The chassis process (chassisd) deleted the indicated interface devices due to a change
in the configuration.
Event: This message reports an event, not an error
warning
LOG_DAEMON
Unable to parse configuration; using defaults
The chassis process (chassisd) could not parse the configuration and used default values
while initializing.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
function-name: warning-message, FPC fpc-slot PIC pic-slot
The configuration that was specified for the indicated PIC is invalid for that type of PIC.
Event: This message reports an event, not an error
warning
LOG_DAEMON
Unable to open device-name device file (errno error-code)
The chassis process (chassisd) could not open the device file for the indicated device.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
function-name: error-message
Copyright © 2010, Juniper Networks, Inc.