Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 628

Junos 10.3 System Log Messages Reference
RPD_SNMP_INVALID_SOCKET
System Log Message
Description
Type
Severity
Facility
RPD_SNMP_SOCKOPT_BLOCK
System Log Message
Description
Type
Severity
Facility
RPD_SNMP_SOCKOPT_RECVBUF
System Log Message
Description
Type
Severity
Facility
RPD_SNMP_SOCKOPT_SENDBUF
System Log Message
Description
Type
Severity
Facility
RPD_START
System Log Message
564
function-name: socket file-descriptor is invalid
The routing protocol process (rpd) could not send a message to a Simple Network
Management Protocol (SNMP) master agent because the indicated socket is invalid.
Error: An error occurred
error
LOG_DAEMON
function-name: unable to set nonblocking option
The routing protocol process (rpd) could not set a socket to nonblocking mode after
connecting to the Simple Network Management Protocol (SNMP) master agent.
Error: An error occurred
error
LOG_DAEMON
function-name: unable to set recvbuf option
The routing protocol process (rpd) could not set the size of the kernel receive buffer,
which allows it to accept the largest possible packet from the Simple Network
Management Protocol (SNMP) master agent.
Error: An error occurred
error
LOG_DAEMON
function-name: unable to set sendbf option
The routing protocol process (rpd) could not set the size of the kernel send buffer, which
allows it to send the largest possible packet to the Simple Network Management Protocol
(SNMP) master agent.
Error: An error occurred
error
LOG_DAEMON
Start executable-name[pid] version version built date
Copyright © 2010, Juniper Networks, Inc.