Severity
Facility
Action
COSD_L2TP_COS_NOT_SUPPORTED
System Log Message
Description
Type
Severity
Facility
Action
COSD_L2TP_SHAPING_NOT_CONFIGURED
System Log Message
Description
Type
Severity
Facility
Action
COSD_LARGE_DELAY_BUFFER_INVALID
System Log Message
Description
Copyright © 2010, Juniper Networks, Inc.
error
LOG_DAEMON
Include the 'per-session-scheduler' statement in the configuration for the interface.
Unable to apply CoS to L2TP session session-id on interface interface-name: it does not
support CoS
The class-of-service (CoS) process (cosd) did not apply CoS settings to the indicated
Layer 2 Tunneling Protocol (L2TP) session on the indicated interface. The interface is
configured to support session-aware CoS for L2TP, but is not on a PIC that supports that
feature, such as an IQ2 PIC. In terms of configuration, the 'per-session-scheduler'
statement is included at the [edit interfaces <interface-name> unit
<logical-unit-number>] hierarchy level.
Error: An error occurred
error
LOG_DAEMON
Determine whether the interface is on an PIC that supports session-aware CoS; if not,
remove the 'per-session-scheduler' statement.
Unable to apply CoS to L2TP session session-id because session-aware shaping is not
enabled for interface interface-name
The class-of-service (CoS) process (cosd) did not apply CoS settings to the indicated
Layer 2 Tunneling Protocol (L2TP) session on the indicated interface, because
session-aware traffic shaping for L2TP is not configured on the PIC that houses the
interface. In terms of configuration, the 'session-shaping' statement is not included at
the [edit chassis fpc <slot-number> pic <pic-number> traffic-manager mode] hierarchy
level.
Error: An error occurred
error
LOG_DAEMON
Include the 'session-shaping' statement in the configuration for the PIC.
Error for interface interface-name error-message
The class-of-service (CoS) process (cosd) did not apply the large delay buffer setting
that is configured for the indicated interface.
Chapter 20: COSD System Log Messages
219
Need help?
Do you have a question about the JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 and is the answer not in the manual?
Questions and answers