Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 292

Junos 10.3 System Log Messages Reference
Type
Severity
Facility
Cause
Action
DCD_PARSE_EMERGENCY
System Log Message
Description
Type
Severity
Facility
Cause
Action
DCD_PARSE_ERROR_CLOCK
System Log Message
Description
Type
Severity
Facility
Action
DCD_PARSE_ERROR_HIER_SCHEDULER
System Log Message
Description
Type
228
Error: An error occurred
warning
ANY
This is a warning message and the current configuration has a few discrepancies to be
addressed.
Contact your technical support representative.
dcd_config: errors while parsing configuration file
The interface process (dcd) encountered an unhandled internal state while parsing the
configuration database.
Error: An error occurred
error
LOG_DAEMON
There might be a bug in the dcd process' parser.
Contact your technical support representative.
PIC housing interface interface-name does not support clocking as configured
The 'clocking' statement is included at the [edit interfaces] hierarchy level for the indicated
interface, but is not supported by the 10-Gigabit Ethernet IQ2 Physical Interface Card
(PIC).
Error: An error occurred
warning
LOG_DAEMON
Remove the 'clocking' statement from the configuration for the interface.
interface-name: PIC or encapsulation type does not support 'hierarchical-scheduler'
statement
The 'hierarchical-scheduler' statement is included at the [edit interfaces] hierarchy level
for the indicated interface, but is not supported either by the PIC or the configured type
of encapsulation.
Error: An error occurred
Copyright © 2010, Juniper Networks, Inc.