Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 431

L2CPD_TASK_SIGNAL_IGNORE
System Log Message
Description
Type
Severity
Facility
L2CPD_TERMINATE_ACTIVE
System Log Message
Description
Type
Severity
Facility
L2CPD_TERMINATE_SIGNAL
System Log Message
Description
Type
Severity
Facility
L2CPD_TRACE_FAILED
System Log Message
Description
Type
Severity
Facility
L2CPD_XSTP_SHUTDOWN_FAILED
System Log Message
Copyright © 2010, Juniper Networks, Inc.
Unable to register SIGsignal-name to be ignored: error-message
The Layer 2 Control Protocol process (l2cpd) informed the kernel that it wished to ignore
the indicated signal, but the kernel did not process the request.
Error: An error occurred
error
LOG_DAEMON
Exited with active tasks: task-name
After receiving multiple termination requests, the Layer 2 Control Protocol process (l2cpd)
exited without performing the indicated cleanup tasks.
Event: This message reports an event, not an error
notice
LOG_DAEMON
Exited after receiving termination signal signal-name
In response to the indicated termination request, the Layer 2 Control Protocol process
(l2cpd) terminated adjacencies with neighbors and shut down.
Event: This message reports an event, not an error
notice
LOG_DAEMON
Unable to write to trace file filename
The Layer 2 Control Protocol process (l2cpd) could not write to the indicated trace file,
and stopped attempting to do so. The next commit of the configuration database will
reenable tracing.
Event: This message reports an event, not an error
error
LOG_DAEMON
Unable to shut down error-message module
Chapter 45: L2CPD System Log Messages
367