Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 621

Cause
RPD_RSVP_NBRUP
System Log Message
Description
Type
Severity
Facility
RPD_RT_CFG_BR_CONFLICT
System Log Message
Description
Type
Severity
Facility
Action
RPD_RT_CFG_CREATE_ENTRY_FAILED
System Log Message
Description
Type
Severity
Facility
Action
RPD_RT_CFG_INVALID_VALUE
System Log Message
Description
Type
Severity
Copyright © 2010, Juniper Networks, Inc.
The communication path to the neighboring router was disrupted, a protocol error
occurred, or the neighboring router was powered down.
RSVP neighbor neighbor-address up on interface interface-name
An RSVP neighbor was established to the indicated address.
Event: This message reports an event, not an error
warning
LOG_DAEMON
static route: route-prefix is also configured as backup-router destination, turn on retain
flag to ensure proper functionality
A conflict occurred between the system backup router configuration and the indicated
static route.
Event: This message reports an event, not an error
warning
ANY
Add the retain flag to the static route
Could not create entry entry
RT failed to create the indicated configuration entry. The configuration request failed.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
The object-name configuration object identifier field has an invalid value of value
The configuration request failed because the indicated configuration object contained
the indicated invalid value.
Error: An error occurred
error
Chapter 73: RPD System Log Messages
557