Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 411

Facility
KMD_SNMP_PIC_CONNECTION_FAILED
System Log Message
Description
Type
Severity
Facility
KMD_SNMP_PIC_NO_RESPONSE
System Log Message
Description
Type
Severity
Facility
KMD_SNMP_PIC_SLOT_NOT_FOUND
System Log Message
Description
Type
Severity
Facility
KMD_VPN_DFBIT_STATUS_MSG
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
LOG_AUTH
Unable to connect to PIC pic-slot; SNMP query failed
The key management process (kmd) could not open a connection to the indicated PIC.
As a result, it could not retrieve Simple Network Management Protocol (SNMP) statistics
about IP Security (IPSec) security associations (SAs).
Error: An error occurred
error
LOG_AUTH
PIC pic-slot did not respond to SNMP query: error-message
The indicated PIC did not respond to a request from the key management process (kmd)
for Simple Network Management Protocol (SNMP) statistics about IP Security (IPSec)
security associations (SAs).
Error: An error occurred
error
LOG_AUTH
Unable to retrieve slot information for PIC pic-slot; SNMP query failed
The key management process (kmd) could not retrieve information about the slot housing
the indicated PIC. As a result, it could not retrieve Simple Network Management Protocol
(SNMP) statistics about IP Security (IPSec) security associations (SAs) from the PIC.
Error: An error occurred
error
LOG_AUTH
The DF-BIT for VPN vpn-name has been set to argument.
VPN DF bit status has been set.
Event: This message reports an event, not an error
info
LOG_DAEMON
Chapter 43: KMD System Log Messages
347