Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 705

UI_COMMIT_SYNC_FORCE
System Log Message
Description
Type
Severity
Facility
UI_CONFIGURATION_ERROR
System Log Message
Description
Type
Severity
Facility
UI_CONFIGURATION_WARNING
System Log Message
Description
Type
Severity
Facility
UI_DAEMON_ACCEPT_FAILED
System Log Message
Description
Type
Severity
Facility
Cause
Action
Copyright © 2010, Juniper Networks, Inc.
All logins to local configuration database were terminated because forced 'commit
synchronize' operation was invoked on other Routing Engine
The 'commit synchronize force' command was issued on the other Routing Engine on
the router. All login sessions in the local configuration database were terminated and
the configuration from the other Routing Engine was committed on the local Routing
Engine.
Event: This message reports an event, not an error
notice
ANY
Process: process-name, path: pathname, statement: configuration-statement,
error-message
The indicated process found a problem in its configuration.
Error: An error occurred
error
ANY
Process: process-name, path: pathname, statement: configuration-statement,
warning-message
The indicated process found a problem in its configuration.
Error: An error occurred
warning
ANY
connection-type socket connection accept failed: error-message
The management process (mgd) did not accept an incoming connection request.
Error: An error occurred
error
LOG_AUTH
An internal software failure occurred.
Contact your technical support representative.
Chapter 88: UI System Log Messages
641