Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 445

Severity
Facility
L2TPD_POOL_ASSIGN_ADDRESS_FAILED
System Log Message
Description
Type
Severity
Facility
L2TPD_PPP_ROUTE_ADD_FAILED
System Log Message
Description
Type
Severity
Facility
L2TPD_PPP_ROUTE_DELETE_FAILED
System Log Message
Description
Type
Severity
Facility
L2TPD_PROFILE_NOT_FOUND
System Log Message
Description
Type
Severity
Copyright © 2010, Juniper Networks, Inc.
error
LOG_NEWS
Unable to assign L2TP pool address: pool pool-name is invalid or has no free addresses
The Layer 2 Tunneling Protocol process (l2tpd) could not assign an address from the
indicated address pool, either because the pool was invalid or had no free addresses.
Error: An error occurred
error
LOG_NEWS
Unable to add PPP peer route (L2TP tunnel tunnel-id, session session-id)
The Layer 2 Tunneling Protocol process (l2tpd) maintains a copy of the Junos
configuration database in memory. It could not add information about a Point-to-Point
Protocol (PPP) peer route to the in-memory configuration for the indicated tunnel and
session.
Error: An error occurred
error
LOG_NEWS
Unable to remove PPP peer route (L2TP tunnel tunnel-id, session session-id)
The Layer 2 Tunneling Protocol process (l2tpd) maintains a copy of the Junos
configuration database in memory. It could not delete information about a Point-to-Point
Protocol (PPP) peer route from the in-memory configuration for the indicated tunnel
and session.
Error: An error occurred
error
LOG_NEWS
Profile profile-name not found
The Layer 2 Tunneling Protocol process (l2tpd) could not locate an access profile from
the configuration in order to find radius servers to authenticate.
Error: An error occurred
error
Chapter 46: L2TPD System Log Messages
381