Chapter 43 Kmd System Log Messages - Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual

CHAPTER 43
KMD System Log Messages
KMD_CFG_IF_ID_POOL_NOT_FOUND
System Log Message
Description
Type
Severity
Facility
KMD_CFG_IF_ID_POOL_NO_ENTRY
System Log Message
Description
Type
Severity
Facility
KMD_CFG_IF_ID_POOL_NO_INTERFACE
System Log Message
Description
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
management process (kmd), which provides IP Security (IPSec) authentication services
for encryption PICs.
Unable to allocate logical interface for IPSec interface from pool pool-name: pool not
found
The key management process (kmd) maintains pools of logical interfaces for assignment
to IP Security (IPSec) interfaces. It could not allocate a logical interface, because it could
not access the indicated pool.
Error: An error occurred
error
LOG_AUTH
Unable to return logical interface interface-name.interface-unit to pool pool-name: no
entry in pool for interface
The key management process (kmd) maintains pools of logical interfaces for assignment
to IP Security (IPSec) interfaces. It could not return the indicated logical interface to the
indicated pool, because there was no entry for the interface in the pool.
Error: An error occurred
error
LOG_AUTH
Unable to allocate logical interface for IPSec interface from pool pool-name: no interfaces
available
The key management process (kmd) maintains pools of logical interfaces for assignment
to IP Security (IPSec) interfaces. It could not allocate a logical interface, because none
were available in the indicated pool.
prefix. They are generated by the key
KMD
325