Chapter 26 Eswd System Log Messages - Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual

CHAPTER 26
ESWD System Log Messages
ESWD_BPDU_BLOCK_ERROR_DISABLED
System Log Message
Description
Type
Severity
Facility
ESWD_BPDU_BLOCK_ERROR_ENABLED
System Log Message
Description
Type
Severity
Facility
ESWD_DAI_FAILED
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
bridging process (eswd).
interface-name: bpdu-block disabled port
This condition occurs when bpdu-block error condition is detected.
Error: An error occurred
alert
LOG_DAEMON
interface-name: bpdu-block enabled port
This condition occurs when bpdu-block error condition is cleared.
Error: An error occurred
alert
LOG_DAEMON
count type received, interface interface-name[index interface-device-index], vlan
vlan-name[index vlan-id], sender ip/mac sender-address/mac1, receiver ip/mac
destination-address/mac2
The ARP request/response receieved on this port cannot be linked to any of the IPs
assigned by DHCP.
Error: An error occurred
alert
LOG_DAEMON
prefix. They are generated by the ethernet
ESWD
249