Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 604

Junos 10.3 System Log Messages Reference
Action
RPD_MPLS_OAM_WRITE_ERROR
System Log Message
Description
Type
Severity
Facility
Action
RPD_MPLS_PATH_BANDWIDTH_CHANGE
System Log Message
Description
Type
Severity
Facility
RPD_MPLS_PATH_BFD_DOWN
System Log Message
Description
Type
Severity
Facility
RPD_MPLS_PATH_BFD_UP
System Log Message
Description
Type
Severity
540
Contact your technical support representative.
Unable to write to pipe to MPLS OAM process: (error-message)
The routing protocol process (rpd) could not write a message on the write pipe to the
MPLS Operation, Administration, and Maintenance process (mplsoamd).
Error: An error occurred
info
LOG_DAEMON
Contact your technical support representative.
MPLS path pathname (lsp lsp-name) bandwidth changed, path bandwidth bandwidth
bps
The bandwidth associated with the indicated Multiprotocol Label Switching (MPLS)
path changed.
Event: This message reports an event, not an error
warning
LOG_DAEMON
BFD session for MPLS path pathname went down on LSP lsp-name
The routing protocol process (rpd) determined that the Bidirectional Forwarding Detection
(BFD) protocol session for the indicated Multiprotocol Label Switching (MPLS) path
terminated on the indicated label-switched path (LSP).
Event: This message reports an event, not an error
notice
LOG_DAEMON
BFD session for MPLS path pathname came up on LSP lsp-name
The routing protocol process (rpd) determined that the Bidirectional Forwarding Detection
(BFD) protocol session for the the indicated Multiprotocol Label Switching (MPLS) path
came up on the indicated label-switched path (LSP).
Event: This message reports an event, not an error
notice
Copyright © 2010, Juniper Networks, Inc.