Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 304

Junos 10.3 System Log Messages Reference
Description
Type
Severity
Facility
Action
DHCPD_OVERLAY_CONFIG_FAILURE
System Log Message
Description
Type
Severity
Facility
Action
DHCPD_OVERLAY_PARSE_FAILURE
System Log Message
Description
Type
Severity
Facility
Cause
Action
DHCPD_RECVMSG_FAILURE
System Log Message
Description
Type
Severity
240
The Dynamic Host Configuration Protocol server process (dhcpd) could not allocate
memory from the heap for the indicated object.
Error: An error occurred
error
LOG_AUTH
Contact your technical support representative.
Unable to open overlay configuration: error-message
The Dynamic Host Configuration Protocol server process (dhcpd) could not open an
overlay configuration file for parsing.
Error: An error occurred
error
LOG_AUTH
Contact your technical support representative.
Unable to parse overlay configuration because of count syntax errors
The Dynamic Host Configuration Protocol server process (dhcpd) could not parse its
overlay configuration because the configuration contained the indicated number of syntax
errors.
Error: An error occurred
error
LOG_AUTH
An internal software failure occurred.
Contact your technical support representative.
Exiting due to too many recvmsg() failures
The Dynamic Host Configuration Protocol server process (dhcpd) could not receive data
from the network, which it needs to do during normal operation.
Error: An error occurred
error
Copyright © 2010, Juniper Networks, Inc.