Junos 10.3 System Log Messages Reference
Facility
Action
CHASSISD_RECONNECT_SUCCESSFUL
System Log Message
Description
Type
Severity
Facility
CHASSISD_RELEASE_MASTERSHIP
System Log Message
Description
Type
Severity
Facility
Cause
CHASSISD_RE_INIT_INVALID_RE_SLOT
System Log Message
Description
Type
Severity
Facility
CHASSISD_RE_OVER_TEMP_CONDITION
System Log Message
Description
Type
198
LOG_DAEMON
Contact your technical support representative.
Successfully reconnected on soft restart
The chassis process (chassisd) successfully reconnected with each Packet Forwarding
Engine after a soft restart.
Event: This message reports an event, not an error
notice
LOG_DAEMON
Release mastership notification
The chassis process (chassisd) running on the master Routing Engine received a request
to release mastership.
Event: This message reports an event, not an error
info
LOG_DAEMON
The Routing Engine was probably rebooting and graceful Routing Engine switchover is
configured.
re_init: re routing-engine-slot, out of range
The chassis process (chassisd) could not initialize a Routing Engine because the slot
number specified for it was invalid.
Error: An error occurred
error
LOG_DAEMON
Routing Engine routing-engine-slot temperature (temperature C) over threshold degrees
C
The temperature of the indicated Routing Engine exceeded the indicated temperature,
which is the upper of two thresholds.
Error: An error occurred
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 and is the answer not in the manual?
Questions and answers