Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 539

Type
Severity
Facility
PING_RTT_STDDV_THRESH_EXCEED
System Log Message
Description
Type
Severity
Facility
PING_RTT_THRESHOLD_EXCEEDED
System Log Message
Description
Type
Severity
Facility
PING_TEST_COMPLETED
System Log Message
Description
Type
Severity
Facility
PING_TEST_FAILED
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
Event: This message reports an event, not an error
info
LOG_DAEMON
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
The standard deviation of the round trip time exceeded the configured threshold during
the indicated test conducted by the indicated user.
Event: This message reports an event, not an error
info
LOG_DAEMON
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
The round trip time measured for a probe exceeded the configured threshold during the
indicated test conducted by the indicated user.
Event: This message reports an event, not an error
info
LOG_DAEMON
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
All probes were sent and the number of failed probes was less than the
pingCtlTrapTestFailureFilter threshold.
Event: This message reports an event, not an error
info
LOG_DAEMON
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
All probes were sent but the number of failed probes equaled or exceeded the
pingCtlTrapTestFailureFilter threshold.
Event: This message reports an event, not an error
info
LOG_DAEMON
Chapter 67: PING System Log Messages
475